Add parallel Print Page Options

Building the chest containing the covenant document

37 Bezalel made the chest of acacia wood. It was forty-five inches long, twenty-seven inches wide, and twenty-seven inches high. He covered the chest with pure gold inside and out, and made a gold molding all around it. He cast four gold rings for it and put them on its four feet, two rings on one side and two rings on the other. He made acacia-wood poles and covered them with gold. He put the poles into the rings on the chest’s sides to use to carry the chest. He made a cover for the chest out of pure gold, forty-five inches long and twenty-seven inches wide. He made two winged heavenly creatures of hammered gold for the two ends of the cover, one winged heavenly creature at one end and one winged heavenly creature at the other. He placed the winged heavenly creatures at the cover’s two ends. The winged heavenly creatures spread out their wings above, shielding the cover with their wings. The winged heavenly creatures faced each other toward the cover’s center.

Constructing the table and lampstand

10 He also made the table of acacia wood, three feet long, eighteen inches wide, and twenty-seven inches high. 11 He covered it with pure gold and made a gold molding all around it. 12 He made a frame around it that was four inches wide and gold molding around the frame. 13 He made four gold rings for the table. He fastened the rings to the four corners at its four legs. 14 The rings that housed the poles used for carrying the table were close to the frame. 15 He made the poles used to carry the table out of acacia wood, and he covered them with gold. 16 He made the containers of pure gold that were to be on the table: its plates, dishes, bowls, and jars for pouring drink offerings.

17 He also made the lampstand of pure, hammered gold. The lampstand’s base, branches, cups, flowers, and petals were all attached to it. 18 It had six branches growing out from its sides, three branches on one side of the lampstand and three branches on the other side of the lampstand. 19 One branch had three cups shaped like almond blossoms, each with a flower and petals, and the next branch also had three cups shaped like almond blossoms, each with a flower and petals. A total of six branches grew out of the lampstand. 20 In addition, on the lampstand itself there were four cups shaped like almond blossoms, each with its flower and petals. 21 There was a flower attached under the first pair of branches, a flower attached under the next pair of branches, and a flower attached under the last pair of branches. 22 Their flowers and their branches were attached to it. The whole lampstand was one piece of pure hammered gold. 23 He made its seven lamps and its tongs and its fire pans out of pure gold. 24 He made the lampstand and all its equipment from pure gold weighing one kikkar.

Making the incense altar, incense, and oil

25 He made the incense altar out of acacia wood. The altar was square, eighteen inches long by eighteen inches wide. It was three feet high, and its horns were permanently attached. 26 He covered it with pure gold, including its top, all its sides, and its horns. He also made a gold molding all around it. 27 He made two gold rings, and he attached them under the molding on two opposite sides of the altar. They housed the poles used to carry it. 28 He made the poles of acacia wood, and he covered them with gold.

29 He also made the holy anointing oil and the pure sweet-smelling incense like a skilled perfume maker.

Making the altar for entirely burned offerings

38 He made the altar for entirely burned offerings out of acacia wood. The altar was square, seven and a half feet long and seven and a half feet wide. It was four and a half feet high. He made horns for it, one horn on each of its four corners. Its horns were attached to the altar, and he covered it with copper. He made all the altar’s equipment: the pails, the shovels, the bowls, the meat forks, and the trays. He made all its equipment out of copper. He made a grate for the altar of copper mesh underneath its bottom edge and extending halfway up to the middle of the altar. He made four rings for each of the four corners of the copper grate to house the poles. He made the poles out of acacia wood, and he covered them with copper. He put the poles through the rings so that the poles were on the two sides of the altar when it was carried. He made the altar with planks but hollow inside.

He made the copper washbasin with its copper stand from the copper mirrors among the ranks of women assigned to the meeting tent’s entrance.

Constructing the dwelling’s plaza

He also set up the courtyard. The courtyard’s south side had drapes of fine twisted linen stretching one hundred fifty feet 10 with twenty posts, twenty copper bases, and silver hooks and bands for the posts. 11 Likewise the north side stretched one hundred fifty feet, with twenty posts, twenty copper bases, and silver hooks and bands for the posts. 12 On the west side the drapes stretched seventy-five feet, with their ten posts, their ten bases, and silver hooks and bands for the posts. 13 The front side facing east was seventy-five feet. 14 There were twenty-two and a half feet of drapes on one side with three posts and three bases for them. 15 Likewise, there were twenty-two and a half feet of drapes on the other side of the plaza’s gate with three posts and three bases for them. 16 All the drapes around the courtyard were made of fine twisted linen. 17 The bases for the posts were made of copper, but the hooks for the posts and their bands were made of silver. The tops of the posts were covered with silver, and all the posts surrounding the courtyard had silver bands. 18 The screen for the gate into the courtyard was made with blue, purple, and deep red yarns and fine twisted linen, decorated with needlework. It was thirty feet long and, along the width of it, seven and a half feet high, corresponding to the courtyard’s drapes. 19 It had four posts, their four copper bases, their silver hooks, and their tops and bands covered with silver. 20 All the tent pegs for the dwelling and for the courtyard all around were made of copper.

A listing of materials used

21 These are the accounts of the dwelling, the covenant dwelling, that were recorded at Moses’ instructions. They are the work of the Levites, under the direction of Ithamar, Aaron the priest’s son. 22 Bezalel, Uri’s son and Hur’s grandson from the tribe of Judah, made everything that the Lord had commanded Moses to make. 23 Working with Bezalel was Oholiab, Ahisamach’s son from the tribe of Dan, who was a gem cutter, a designer, and a needleworker in blue, purple, and deep red yarns and in fine linen.

24 The total amount of the gold that was used for construction of the whole sanctuary, gold from the uplifted offerings, was twenty-nine kikkars and seven hundred thirty shekels in weight, measured by the sanctuary shekel. 25 The silver from the community census totaled one hundred kikkars and one thousand seven hundred seventy-five shekels in weight, measured by the sanctuary shekel. 26 They gave a beqa per person (that is, half a shekel, measured by the sanctuary shekel) for everyone who was counted in the census, 20 years old and above, 603,550 men. 27 One hundred kikkars of silver were used to cast the bases for the sanctuary and the bases for the veil, one hundred bases from one hundred kikkars of silver, one kikkar for every base. 28 He used one thousand seven hundred seventy-five shekels of silver[a] to make the hooks for the posts, cover their tops, and make bands for them. 29 The amount of copper from the uplifted offering was seventy kikkars and two thousand four hundred shekels in weight. 30 He used it to make the bases for the meeting tent’s entrance, the copper altar, its copper grate, and all the altar’s equipment, 31 the bases all around the courtyard, and the bases for the courtyard’s gate, all the dwelling’s tent pegs, and all the tent pegs used around the courtyard.

Footnotes

  1. Exodus 38:28 Heb lacks shekels of silver.

Bible Gateway Recommends